ULTRA-DIN

DIN Rail Mount Vehicle Loop Detector

  • Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
  • Easy to install and setup with the ULTRAMETER™ sensitivity display
  • Low current draw – green product
  • Easy identification of interference problems using the crosstalk and RFI interference display
  • Fits into small operator housings, saving space

Part Number:

  • EMX-2600-1

Overview of Our ULTRA-DIN

The ULTRA-DIN vehicle loop detector combines small size with full-featured functionality in a DIN rail mount module.

The ULT-DIN features DETECT-ON-STOP™ or (DOS) technology, which allows detection only when a vehicle has come to a complete stop on the loop. This exclusive feature for our DIN rail mount vehicle loop detector is unique to EMX and is a major advantage if you want to ignore cross traffic in tight spaces.

The ULT-DIN provides relay contact outputs indicating vehicle presence and a set of output contacts for loop fault or pulse on entry/pulse on exit, or DETECT-ON-STOP.

 

Features of Our ULTRA-DIN Vehicle Detector

  • DIN rail mount – 35mm width
  • ULTRAMETER™ displays optimum sensitivity setting/crosstalk interference
  • DETECT-ON-STOP™ allows detection only when a vehicle has come to a complete stop on the loop
  • 10 sensitivity settings
  • 4 operating frequencies
  • Automatic sensitivity boost (ASB), delay, fail-safe/fail-secure and infinite or normal (5 min.) presence
  • Small size: 80 x 23 x 84 mm
  • Set of output contacts for loop fault or pulse on entry /pulse on exit, or the new EMX feature, DETECT-ON-STOP™
  • CE compliant

 

ULTRA-DIN Specs

Sensitivity 10 levels, 0-9
UltraMETER™ display Indicates optimum sensitivity level, 0-9 Diagnostic aid
Loop frequency 4 settings (low, med-low, med-hi, high)
Loop inductance 20…2000µH (Q factor > 5)
Grounded loop Isolation transformer allows operation with poor quality loops
Automatic tuning Detector tunes to loop on power-up and following frequency count function
Environmental tracking Automatic compensation
Surge protection Loop circuitry protected by surge suppressors
Presence relay SPDT relay contacts (form C)
Output B relay SPST relay contact (form A) (available on ULT-DIN only)
Contact ratings 1A @ 24VDC…120VAC
Power / loop fault indicator Green LED
Detect / frequency count indicator Red LED
Detect On Stop Requires vehicle to stop for a minimum of 1 second (1-2s typical)
ASB (Automatic Sensitivity Boost) Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles
Power 12-24VDC/AC
Operating current 15mA standby / 45mA detect
Operating temperature -40°C…82°C (-40°F…180°F) 0…95% relative humidity
Dimensions (L x W x H) 80mm (3.2”) x 23mm (0.9”) x 84mm (3.3”)
Weight 0.25 lbs. (113 g)
Mounting method DIN rail mount – 35mm width
Connections 10 screw terminals

PR-LOOP
Preformed loop
2×6, 4×6, 4×8, 4×10, 6×10 or 8×12 ft with 50 ft lead
Specs
Manual

TSTL
Test loop
1.25 x 1.25 x 0.75 inches
Instructions

Spec Sheet
Manual
Detect-on-Stop Technology

Loop Information

Loop Sizes
Loop Installation
Preformed Loop Spec Sheet
Preformed Loop Manual
Test Loop Instructions

You may also like...

Have Any Questions ?

Have questions or need pricing on one of our products?