MVP D-TEK

Multi-Voltage Vehicle Loop Detector

  • Universal voltage
  • Reduced inventory costs
  • Operates in both fail safe and fail secure modes
  • Reliability

Part Number:

  • EMX-2550-1

MVP D-TEK Overview

The MVP D-TEK multi-voltage vehicle detector makes it simple to manage your stock. All you need is one detector in your stock room and on your truck. This multi-voltage vehicle detector solves the problem of not knowing which voltage to take for service a call or installation. Reduce the cost of inventory by stocking only one loop detector – with the universal voltage of our MVP D-TEK.

 

Features of Our Multi-Voltage Vehicle Detector

  • Multi-voltage power 12 to 220 VAC/DC
  • Operates in both fail safe and fail secure modes
  • 10 sensitivity settings
  • Enhanced lightning/surge immunity
  • Aluminum RF shield housing
  • Built-in loop conditioner
  • Loop isolation transformer
  • Loop diagnostics
  • Frequency counter
  • Gold plated control contacts
  • 2 relays (presence & pulse or presence)

 

MVP D-TEK Specs

Power Supply 12VDC to 240VAC
Current Consumption 19.2mA @ 9VDC, 18.8 mA @ 12VAC/DC, 17.3 mA @ 24VAC, 9.5 mA @ 24VDC, 13.5 mA @ 115VAC
11.0 mA @ 237VAC
Operating Temp -40°F to +180°F
Surge Protection Zener Diode /MOV
Output Relays (2) 1Amp 30 VDC
Loop Input Transformer isolation, lightning and transient protection (1)
Loop Inductance Range 20 – 2000 uH Q-factor of 5 or higher
Tuning Automatic on reset or power up
Tracking Automatic for environmental changes
Size Height 3.25” (83mm) Width 2.56” (40mm) Length 3.65” (90mm)
Housing Extruded Anodized Aluminum
Connector 86CP11 11 pin male

Features of Our Multi-Voltage Vehicle Detector

  • Multi-voltage power 12 to 220 VAC/DC
  • Operates in both fail safe and fail secure modes
  • 10 sensitivity settings
  • Enhanced lightning/surge immunity
  • Aluminum RF shield housing
  • Built-in loop conditioner
  • Loop isolation transformer
  • Loop diagnostics
  • Frequency counter
  • Gold plated control contacts
  • 2 relays (presence & pulse or presence)
Power Supply 12VDC to 240VAC
Current Consumption 19.2mA @ 9VDC, 18.8 mA @ 12VAC/DC, 17.3 mA @ 24VAC, 9.5 mA @ 24VDC, 13.5 mA @ 115VAC
11.0 mA @ 237VAC
Operating Temp -40°F to +180°F
Surge Protection Zener Diode /MOV
Output Relays (2) 1Amp 30 VDC
Loop Input Transformer isolation, lightning and transient protection (1)
Loop Inductance Range 20 – 2000 uH Q-factor of 5 or higher
Tuning Automatic on reset or power up
Tracking Automatic for environmental changes
Size Height 3.25” (83mm) Width 2.56” (40mm) Length 3.65” (90mm)
Housing Extruded Anodized Aluminum
Connector 86CP11 11 pin male

HAR-11 11 position harness 3 feet of wire


LD-11
Black, wide profile, 11 pin socket base for DIN rail mount

LD-11B Black, narrow profile, 11 pin socket base for DIN
rail mount



PR-LOOP Preformed loop 2×6, 4×6, 4×8,
4×10, 6×10 or 8×12 ft with 50 ft lead Specs
Manual



TSTL Test loop 1.25 x 1.25 x 0.75 inches Instructions

Spec Sheet
Manual
Spanish Manual

Loop Information

Loop Sizes
Loop Installation
Preformed Loop Spec Sheet
Preformed Loop Manual
Test Loop Instructions

You may also like...

Have Any Questions ?

Have questions or need pricing on one of our products?